ACharacteristics graph

Displays the characteristics of the automatic gain control. By dragging the marker with the mouse, threshold level and ratio of the compressor and threshold level of the gate can be changed.

BON button

Click to turn the automatic gain control on or off. When set to on, this button lights up green.

CCOMPRESSOR THRESHOLD setup box Specifies the threshold level of the compressor. The level can be set within the range of –60 dB to +20 dB, in 1-dB steps.

DRATIO setup box

Specifies the ratio of the compressor. The value can be set within the range of 1 : 1 to ∞ : 1, in 14 steps.

EMAKE GAIN setup box

Specifies the make up gain value. The value can be set within the range of 0 dB to +10 dB, in 1-dB steps.

FGATE THRESHOLD setup box

Specifies the threshold level of the gate. The value can be set within the range of –60 dB to 0 dB, in 1-dB steps.

GRANGE setup box

Specifies the range of the gate. The value can be set within the range of –60 dB to 0 dB, in 1-dB steps.

HATTACK setup box

Specifies the attack time. The value can be set within the range of 0.1 ms to 33000 ms, in 32 steps.

IHOLD TIME setup box

Specifies the hold time. The value can be set within the range of 0.1 ms to 33000 ms, in 32 steps.

JRELEASE setup box

Specifies the release time. The value can be set within the range of 0.1 ms to 33000 ms, in 32 steps.

KGAIN CONTROL indication

Shows the amount of gain control obtained by the AGC function.

LCLOSE button

Click to close the AUTO GAIN CONTROL setting screen.

fFR/EQ (Feedback Reducer/Equalizer) button Left-click to display the MIC INPUT EQUALIZER setting screen.

AChannel selection button

Selects the input channel that you want to set. The selected button lights up yellow. To select the other channel, left-click the corresponding button.

BEqualizer pattern graph

Appears when “EQ” is selected on the FR/EQ selection radio button.

The markers with the same color as the corresponding band in the EQ parameter appear on the graph. You can change the gain and frequency for each band by dragging the corresponding marker with the mouse. Right-clicking the marker returns the gain to 0 dB. You can also change the Q value by rolling the center wheel of the mouse up or down.

CLCF (low-cut filter) button

Each click on this button toggles the low-cut filter between on and off. This button lights up green when set to on. The low-cut filter reduces low-frequency components such as blowing noise and makes the sound clearer.

DFR/EQ button

Each click on this button toggles the feedback reducer or equalizer between on and off. This button lights up green when set to on.

EFR/EQ selection radio buttons

Names and Functions of Controls on Screen 11