ECommand input section
Enter the commands to be sent from the mixer to the projector to turn it on, to set it to standby status, or to select the input channel. Enter the command as a hexadecimal number using numbers 0 to 9 and letters A to F.
The maximum length of the command is 32 bytes.
FWAIT input box
Specify the wait time until the another command is sent after the projector has received the previously sent command.
GTEST button
Press to run the test on sending command.
HPROJECTOR INPUT SELECT buttons
Press one of the buttons to select the signal format, then enter the command defining the input channel on the projector for the signal format.
ICOMMAND SEQUENCE indication
Shows the sequence of commands and the wait time to be sent for defining the input channel on the projector.
JCLOSE button
Click to close the PROTOCOL SETTING setting screen.
cPROJECTOR POWER setting section
By checking the SYNC WITH POWER ON checkbox, you can interlock the power on/off control of the projector with the POWER switch operation on the
dSIGNAL DEFINE selection radio buttons
Click to select the format of the video signal which is input to each of the AV/RGB INPUT connectors.
SCENE MEMORY screen
You can store the settings that you usually use as a scene file to internal memory of the mixer to recall it whenever
you use it. Or, by storing scene files in advance, you can quickly deal with division of the room.
a SCENE MEMORY button | The color of the button shows the status of the scene file |
number. | |
| Green: Currently selected. |
18 Names and Functions of Controls on Screen