104GB
D:\NORM'S JOB\SONY HA\SO0054\STR-DA2400ES\CEL VERSION\3289204423\04GB-
STRDA2400ESUC\090OTH_GB.fm
masterpage: Left
STR-DA2400ES
3-289-204-42(3)
To select Enhanced Surround
Mode
1Press AMP.
2Press MENU.
3Press V/v repeatedly to select
“<SURROUND>”, then press or b.
4Press V/v repeatedly to select
“<E.SUR MODE>”, then press or b.
5Press V/v repeatedly to select the
Enhanced Surround Mode you want,
then press .
Note
The selected Enhanced Surround Mode can only be
applied if you have selected “E.SURROUND” by
pressing A.F.D repeatedly.
Press 2CH/A.DIRECT repeatedly to
select “A.DIRECT”.
For details on the tuner function, see “Tuner
Operations” (page 72).
Tuning radio stations
1Press TUNER repeatedly to select the
FM or AM band.
You can also use INPUT SELECTOR on
the receiver.
2Press TUNING + or TUNING –.
Press TUNING + to scan from low to high
frequencies, press TUNING – to scan from
high to low frequencies. The receiver stops
scanning whenever a station is received.
You can also press TUNING MODE on the
receiver to select “AUTO” and then turn
TUNING +/– to select stations.
Selecting a frequency directly
(Direct Tuning)
1After selecting the FM or AM band,
press D.TUNING.
2Press SHIFT, then press numeric
buttons to enter the frequency.
3Press .
1Tune in the station that you
want to preset.
For details on the operation, refer to
“Tuning radio stations”.
2Press SHIFT, then press ENT/
MEM.
You can also use MEMORY/ENTER on
the receiver.
“MEM” lights up for a few seconds.
Perform steps 3 and 4 before “MEM”
disappears.
3Press PRESET + or PRESET –
to select a preset number.
30 FM and 30 AM preset numbers are
available. If “MEM” disappears before
you select the preset number, start again
from step 2.
4Press ENT/MEM.
If SHIFT indicator is light off before you
press ENT/MEM, press SHIFT.
You can also use MEMORY/ENTER on
the receiver. The station is stored as the
selected preset number.
If “MEM” disappears before you press
ENT/MEM, start again from step 2.
5Repeat steps 1 to 4 to preset