43GB
D:\NORM'S JOB\SONY HA\SO0054\STR-DA2400ES\CEL VERSION\3289204423\04GB-
STRDA2400ESUC\030CON_GB.fm
masterpage: Right
STR-DA2400ES
3-289-204-42(3)
Getting Started
4Press V/v repeatedly to select
“Speaker Impedance”, then
press or b.
5Press V/v repeatedly to select
“4 ohms” or “8 ohms”
depending on the speakers you
are using, then press .
Notes
If you are not sure of the impedances of the
speakers, refer to the operating instructions
supplied with your speakers. (This information is
often on the back of the speaker.)
When you connect all speakers with a normal
impedance of 8 ohms or higher, set “Speaker
Impedance” to “8 ohms”. When connecting other
types of speakers, set it to “4 ohms”.
When you connect front speakers to both the
SPEAKERS A and B terminals, connect the
speakers with a normal impedance of 8 ohms or
higher.
When you connect speakers with impedance of
16 ohms or higher in both “A” and “B”
configuration:
Set “Speaker Impedance” to “8 ohms” in the
Speaker settings menu.
For other types of speakers in other
configurations:
Set “Speaker Impedance” to “4 ohms” in the
Speaker settings menu.