Sony 3-289-204-42(3) Programming the remote, 1, 2, 3, 4, 5, 2,3

107GB

D:\NORM'S JOB\SONY HA\SO0054\STR-DA2400ES\CEL VERSION\3289204423\04GB-

STRDA2400ESUC\100REM_GB.fm

masterpage: Right

STR-DA2400ES

3-289-204-42(3)

Using the Remote

Programming the remote

You can customize the remote to match the

components connected to your receiver. You

can even program the remote to control non-

Sony components and also Sony components

that the remote is normally unable to control.

The procedure below uses as an example a

case in which a VCR made by a company other

than Sony is connected to the VIDEO 1 IN

jacks on the receiver.

Before you begin, note that:

– You cannot change the settings of PHONO.

– The remote can control only components

that accept infrared wireless control signals.

Be sure to turn on the receiver

and point the remote towards

the receiver when performing

the following procedure.

1Press AV ?/1 while pressing RM

SET UP.

The RM SET UP indicator slowly flashes.

2Press the input button

(including TV) for the

component you want to control.

For example, if you are going to control a

CD player, press SA-CD/CD.

The RM SET UP and the SHIFT button

indicator light up.

If you press the button for a component of

which you cannot program the remote,

such as DMPORT, etc., the RM SET UP

indicator keeps flashing.

3Press the numeric buttons to

enter the numeric code (or one

of the codes if more than one

code exists) corresponding to

the component and the maker

of the component you want to

control.

See the tables on page 108–111 for

information on the numeric code(s).

Note

For a TV remote code value, only numbers in

the 500’s are valid.

4Press ENT/MEM.

Once the numeric code has been verified,

the RM SET UP indicator slowly flashes

twice and the remote automatically exits

the programming mode.

5Repeat steps 1 to 4 to control

other components.

Notes

• The indicator turns off while a valid button is

pressed.

• In step 2, if you press TUNER, you can only

program the button to control a tuner (page 111).

• In step 2, if you want to change to other input, press

SHIFT and then press the new input buttons you

want.

• For the numeric codes, only the last three numbers

entered are valid.

MUSICMOVIE

MULTI IN

PHONO DMPORT

VIDEO 2

VIDEO 1

TUNER

THEATRE

AMPTV

SHIFT

DVD TV

MD/

TAPE

SA-CD/

A.F.D.

A.DIRECT

2CH/

789

456

123

0/10

ENT/MEM

-/--

CLEAR/>10

SAT