Attaching with the soft case
The transmitter can be attached to the user |
|
with the supplied soft case. |
|
All operations are possible when the |
|
transmitter is attached with the soft case. |
|
The clip can be attached to the soft case at |
|
an angle of 0, 90, 180, or 270 degrees, |
|
allowing you to attach the transmitter in a | Clasp |
variety of positions. |
Removing the clip
Remove the transmitter from the soft case before attaching or removing the supplied clip.
1 Remove the transmitter from the soft case.
2 Insert your fingers between the clip and the soft case as shown in the illustration and pull the clip in the direction of the arrow.
3 Press down on the clasp as shown in the illustration and slide the clip in the direction of the arrow.
36 Attaching with the soft case