Symptom | Meanings | Remedy |
There is too | The microphone connected to | Use the |
much bass. | the transmitter produces | bass. |
| excessive bass because the |
|
| frequency response of the |
|
| transmitter extends into the low |
|
|
| |
|
|
|
The power | The power switch is locked. | Turn off the POWER SW LOCK |
does not turn |
| function. |
off even though |
|
|
the power |
|
|
switch is turned |
|
|
to OFF. |
|
|
|
|
|
Wireless | Pairing has not been established | Carry out pairing (see page 26). |
remote control | between the transmitter and |
|
is not possible. | receiver. |
|
|
|
|
| The receiver is too far from the | Check the wireless remote control |
| transmitter for communication to | condition level. If it is low, |
| occur. | decrease the distance between |
|
| the transmitter and the receiver. |
|
|
|
| The transmitter that was paired | On the receiver, carry out pairing |
| with the receiver has been | again with the transmitter that you |
| paired with another receiver. | want to control. |
|
|
|
The USB | You are using a USB keyboard | Check the conditions for using a |
keyboard does | that is not compatible with the | USB keyboard with the transmitter |
not work. | transmitter. | (see page 30). |
|
|
|
The display is | The display brightness is set to | Adjust the brightness of the display |
too dark. | low. | (see page 35). |
|
|
|
Troubleshooting 39