Using wireless remote control, this function can be controlled from the receiver and other devices.

Power save setting (POWER

SAVE)

To conserve power, this setting allows you to put all transmitter functions to sleep.

ACTIVE: The transmitter operates normally.

SLEEP: The sleep function is on. During sleep, the POWER indicator flashes at 2- second intervals.

Setting the encrypted transmission function

(ENCRYPTION)

You can set the encrypted transmission function.

SECURE KEY: Sets the secure key method.

PASSWORD: Sets the password method.

OFF: The encrypted transmission function is not used.

For details, see “Using the encrypted transmission function” on page 28.

To change back to normal operation

During sleep, press the SET, +, or – button.

You can also use the wireless remote control to change the receiver back to normal operation.

For details on wireless remote control function, see “Using the wireless remote control function” on page 26.

Displaying the accumulated use time (TIME)

You can display the accumulated battery use time as a rough estimate of total transmitter usage.

The factory setting is “00:00”.

To reset the accumulated time indication

1 Hold down the SET button until the time indication flashes.

2 Press the – button so “00:00 RESET” appears, and then press the SET button.

Generating an internal

signal (INTERNAL SG)

This transmitter generates a 1-kHz reference level sine wave that can be used to adjust or check the audio level of the receiver or the system that you are using. This internal signal is outside the control of the attenuator.

1 kHz: A 1-kHz internal signal is generated.

OFF: An internal signal is not generated.

Note

If the transmitter is turned off while the reference signal function is on, the function will turn off automatically.

Locking the power switch

(POWER SW LOCK)

The power switch can be locked to prevent the transmitter from being accidentally turned off or on.

Even when the power switch is locked, all parts of the transmitter other than the power switch remain functional.

UNLOCK: The power switch is not locked.

34 Setting menus