Inserting batteries into the remote

Insert two R6 (size-AA) batteries in the main and the zone 2/zone 3 remote commanders. Observe the correct polarity when installing batteries.

Notes

•Do not leave the remote in an extremely hot or humid place.

•Do not use a new battery with old ones.

•Do not mix manganese batteries and other kinds of batteries.

•Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction.

•If you do not intend to use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.

•When you replace the batteries, the programmed remote codes may be cleared. If this happens, program the remote codes again (page 137).

Tip

When the remote no longer operates the receiver, replace all the batteries with new ones.

7: Displaying the GUI

menu on the TV screen

Getting

 

You can select the functions or change the

Started

settings of the receiver by using the GUI menu

 

on the TV screen. Follow the procedure below

 

to make the settings so that the GUI menu

 

appears on the TV screen.

 

Tip

Refer to “Operating without connecting to a TV” (page 129) if you want to operate the receiver without connecting to a TV.

?/1

AMP

GUI

MODE

MENU

1 Connect a TV monitor to this receiver.

Refer to “3: Connecting the monitor” (page 26).

2 Turn on the receiver and the TV.

3 Press AMP.

The receiver can be operated using the remote.

continued

45GB