10Press V/v repeatedly to select “Finish.” Settings stored as a macro are cleared.
158GB
Repeat steps 8 and 9 to clear the stored macro.
9
The menu is displayed on the TV screen.
3 Press V/v repeatedly to select
“ Settings,” then press or b.
4 Press V/v repeatedly to select “Quick
Click,” then press or b.
5 Press V/v repeatedly to select “Macro Setup,” then press .
6 Press V/v repeatedly to select the macro number you want, then press .
7 Press V/v repeatedly to select the step number you want, then press .
8 Press V/v repeatedly to select “–” as a component name, the press .
Press MENU.
2
The name you entered is registered.
To cancel naming input
Press V/v/B/b to select “Cancel,” then press
.
To erase a programmed macro
1 Press AMP.
The receiver can be operated using the remote.
press
.
9 Press V/v/B/b to select “Finish,” then

Setting remote control codes that are not stored in Quick Click

AMP

V/v/B/b,

MENU

1

2

Press AMP.

The receiver can be operated using the remote.

Press MENU.

The menu is displayed on the TV screen.

3 Press V/v repeatedly to select “Settings,” then press or b.

4 Press V/v repeatedly to select “Quick Click,” then press or b.

5 Press V/v repeatedly to select “Source Component,” or “Common Component,” then press .