Using USB Photo Viewer

You can enjoy photo files stored in a Sony digital still camera or camcorder through a USB cable or USB storage media on your unit.

1Connect a supported USB device to the media receiver.2Press HOME.

3Press G/g to select “Photo”, then press F/ f to select “USB Photo Viewer” and press .

The thumbnail screen appears.4Press F/f/G/g to select a file or folder, then press .When you select a folder, select a file, then press .Playback starts.5Press RETURN to go back to the thumbnail screen.

Additional operations

Option

Description

Device SelectionPress G/g to select a

 

device when multiple

 

devices are connected.

 

BRAVIA images are

 

predefined device.

 

 

SlideshowDisplays the photographs

 

one by one.

 

 

Set-up

You can make advanced

 

settings for a slide show,

 

and set the display

 

sequence of the

 

thumbnails.

 

 

(Photo) Available Options

Option

Description

Picture Mode

See page 39.

 

 

Sleep Timer

See page 30.

 

 

Power Saving

See page 43.

~

Picture quality may appear coarse when using (Photo) because images may be enlarged

depending on the file. Also, images may not fill the entire screen depending on the image size and aspect ratio.

Some photo files may take some time to be displayed when using (Photo).
While the unit is accessing the data on the USB device, observe the following:Do not turn off the unit or connected USB device.Do not disconnect the USB cable.Do not remove the USB device.The data on the USB device may be damaged.

Sony will not be held liable for any damage to, or loss of, data on the recording media due to a malfunction of any connected devices or the unit.

USB photo viewer supports DCF-compliant JPEG photographs only.

When you connect a Sony digital still camera, set the camera’s USB connection mode to Auto or “Mass Storage.” For more information about USB connection mode, refer to the instructions supplied with your digital camera.

USB Photo Viewer supports FAT32 file system only.

Depending on the exact file specifications, some files, including those modified on a PC, cannot be played even if the file format is supported.

Check the website below for updated information about compatible USB devices. http://support.sony-europe.com/TV/compatibility/

To display a photograph— Picture Frame

You can display a photograph on the screen for a selected period of time. After that period, the unit automatically switches itself into standby mode.

1Press HOME.

2Press G/g to select “Photo”, then press F/ f to select “Picture Frame” and press .

To select a photograph

Press OPTIONS, then select “Image Selection” and press . Then, select a photograph, and press to set.

To set the duration of displaying a photograph

Press OPTIONS, then select “Duration” and press . Then, select the duration, and press .

The counter appears on the screen.To return to the XMB™Press RETURN.

~

If the photograph is selected from a USB device, it must remain connected to the unit.

If “Sleep Timer” is activated, the unit automatically will switch into standby mode.

Equipment Optional Using

27 GB