Connecting IR Blaster to the optional equipment
Turn the power of the media receiver off before connecting the IR Blaster.
Attach the IR Blaster near the remote sensor (IR) of the equipment.
Media receiver
IR BLASTER
IR
Blaster
Optional equipment
Performing the IR Blaster Set-up
By setting “IR Blaster
1Press HOME on the remote.
2Press F/f to select “Settings”, then press
.
3Press F/f to select “Media Receiver Set- up”, then press .
4Press F/f to select “IR Blaster
The “IR Blaster
IR Blaster
Inputs | Type | Make | Code |
AV1 | - | - | - |
AV2 | - | - | - |
HDMI 1 | Sony | 1 | |
HDMI 2 | - | - | - |
HDMI 3 | - | - | - |
Component | - | - | - |
5Press F/f to select “Inputs” to register the remote, then select the following items:
Type: Connected equipment category.
Make: Maker of the equipment.
Code: IR code.
Test: Tests the power of the equipment currently being set. Make sure the power of the equipment turns on and off.
If the equipment is not working, or some of the functions do not work
Enter the correct code or its alternatives (if available) shown in the list in step 5. Note that the list may not include codes for all models of all brands.
~
•Only Sony equipment is guaranteed to properly operate.
Guide