Extron electronic P/2 DA4XI manual P/2 DA4xi and P/2 DA6xi, cont’d Specifications, Video input

P/2 DA4xi and P/2 DA6xi, cont’d

Specifications

Video

Gain	0 dB or +3 dB (when input is 0.7 Vp-p,
	output is 0.7 V or 1.0 V, switchable)
Bandwidth	350 MHz (-3 dB), fully loaded

Video input

Number/signal type	1 VGA-QXGA RGBHV, RGBS, RGsB,
	RsGsBs, HDTV component video, S-video,
	composite video

NThese DAs are compatible with all the signal formats listed above when the gain DIP switch is set to 0.7 V. They are compatible with only RGBHV and RGBS when the gain DIP switch is set to 1.0 V.

Connectors	(1) 15-pin HD female (optional Mac/VGA
	adapters are available)
Nominal level	1.0 Vp-p for Y of component video and
	S-video, and for composite video
	0.7 Vp-p for RGB and for R-Y and B-Y of
	component video
	0.3 Vp-p for C of S-video
Minimum/maximum levels	Analog: 0.3 V to 1.5 Vp-p with no offset at
	unity gain
Impedance	75 ohms
Horizontal frequency	15 kHz to 135 kHz
Vertical frequency	30 Hz to 150 Hz
Return loss	<-40 dB @ 5 MHz
Input coupling	DC

Video output

Number/signal type
P/2 DA4xi	4 VGA-QXGA RGBHV, RGBS, RGsB,
	RsGsBs, HDTV component video, S-video,
	composite video (follows input type)
P/2 DA6xi	6 VGA-QXGA RGBHV, RGBS, RGsB,
	RsGsBs, HDTV component video, S-video,
	composite video (follows input type)

8P/2 DA4xi/6xi • User’s Guide