Extron electronic P/2 DA6XI manual Video Gain, P/2 DA4xi/6xi User’s Guide, Signal Compatibility

Extron

P/2 DA6xi

VGA Distribution

Ampli￿er

Displays

PC

Projector

Video Gain

The Video Gain switch is located on the rear panel with a default setting of 0.7 V (down). Set the switch to 1 V when long cable runs affect the picture quality. This boosts the signal level to compensate for degradation due to cable length.

Signal Compatibility

Signal compatibility is affected by voltage. When the Video Gain switch is set to

•0.7 V (default) — the P/2 DA can pass all signal types (VGA-QXGA, RGBHV, RGBS, RGBsB, RsGsBs, component video, S-video and composite video).

•1 V — the P/2 DA can pass only the RGBHV and RGBS video types.

P/2 DA4xi/6xi • User’s Guide 7