Extron electronic P/2 DA6XI, P/2 DA4XI manual Sync, P/2 DA4xi/6xi User’s Guide

NThese DAs are compatible with all the signal formats listed above when the gain DIP switch is set to 0.7 V. They are compatible with only RGBHV and RGBS when the gain DIP switch is set to 1.0 V.

Connectors
P/2 DA4xi	(4) 15-pin HD female
P/2 DA6xi	(6) 15-pin HD female
Nominal level	1.0 Vp-p for Y of component video and
	S-video, and for composite video
	0.7 Vp-p for RGB and for R-Y and B-Y of
	component video
	0.3 Vp-p for C of S-video
Minimum/maximum levels	0.3 V to 1.5 Vp-p (follows input)
Impedance	75 ohms
Return loss	<-40 dB @ 5 MHz
DC offset	±5 mV with input at 0 offset

Sync

Input type	RGBHV, RGBS, RGsB, RsGsBs; bi-level
	and tri-level sync
Output type	RGBHV, RGBS, RGsB, RsGsBs; bi-level
	and tri-level sync (follows input)

NThese DAs are compatible with all the signal formats listed above when the gain DIP switch is set to 0.7 V.

Input level	1.8 V to 5.0 Vp-p
Output level	TTL: 5.0 Vp-p, unterminated
Input impedance	510 ohms
Output impedance	50 ohms
Max. propagation delay	60 ns
Max. rise/fall time	2 ns
Polarity	Positive or negative (follows input)

P/2 DA4xi/6xi • User’s Guide 9