Sony 4-115-568-11(1) 42 GB, Screen, HDMI Set-up, 4:3, Off, Smart, -1/-2, Normal, 1080i/p, “Zoom.”, Full Pixel, Auto TV On, Auto Volume, Auto Format, 4:3 Default, proportions

Auto Volume	Keeps a constant volume level even when volume level gaps occur (e.g., adverts
	tend to be louder than programmes).
Volume Offset	Adjusts the volume level of the current input relative to other inputs.

~

• Some options are not available when “Speaker” is set to “Audio System” or headphones are connected.

Screen

Screen Format	See “To change the screen format manually” on page 21.
Auto Format	Automatically changes the screen format according to the input signal. To keep
	your setting, select “Off.”
4:3 Default	Selects the default screen format for use with 4:3 broadcasts.
	Smart	Displays conventional 4:3 broadcasts with an imitation wide
		screen effect.
	4:3	Displays conventional 4:3 broadcasts in the correct
		proportions.
	Off	Keeps the current “Screen Format” setting when the channel
		or input is changed.
Display Area	Adjusts the picture display area in 1080i/p and 720p sources when “Screen
	Format” is set to “Wide.”
	Full Pixel	Displays pictures in their original size if the input source is
		1080i/p.
	Normal	Displays pictures in their recommended size.
	-1/-2	Enlarges the picture to hide the edges of the picture.
Horizontal Shift	Adjusts the horizontal position of the picture.
Vertical Shift	Adjusts the vertical position of the picture when “Screen Format” is set to “Zoom.”
Vertical Size	Adjusts the vertical size of the picture when “Screen Format” is set to “Smart” or
	“Zoom.”

HDMI Set-up

This is used to set the “Control for HDMI” compatible equipment connected to the HDMI sockets. Note that the interlock setting must also be made on the connected “Control for HDMI” compatible equipment side.

Control for HDMI	This sets whether to interlock the “Control for HDMI” compatible equipment and
	the unit. When set to “On”, the following menu items can be performed. However,
	power consumption in standby mode is higher than usual.
Auto Devices Off	When this is set to “On”, the “Control for HDMI” compatible equipment turns off
	when you switch the unit to standby mode using the remote.
Auto TV On	When this is set to “On” and if the connected HDMI, control compatible
	equipment is turned on, the unit automatically turns on, and the displays the HDMI
	input from the connected equipment.
Device List Update	Creates or updates the “HDMI Device List.” Up to 14 “Control for HDMI”
	compatible equipment can be connected, and up to 4 equipment can be connected
	to a single socket. Be sure to update the “HDMI Device List” when you change the
	“Control for HDMI” compatible equipment connections or settings. Select them
	manually one by one until getting a correct picture for several seconds.
HDMI Device List	Displays the connected “Control for HDMI” compatible equipment.

42 GB