Note
•The message “Custom WB error” indicates that the value is beyond the expected range. (When the flash is used on a subject in close proximity or a subject with a
bright color is in the frame.) If you register this value, the 
indicator turns yellow on the recording information display on the LCD monitor. You can shoot at this
point, but it is recommended that you set the white balance again to get a more correct white balance value.
To call the custom white balance setting
Fn button t[White balance] t 
(Custom)
Note
•If the flash is used when the shutter button is pressed, a custom white balance is registered with the flash light taken into account. Take pictures with the flash in later shootings.
94