38GB
Listening to FM/AM radio
You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and
AM antennas (aerials) to the receiver (page
29).
Tip
The tuning scale for direct tuning differs depending
on the area code as shown in the following table. For
details on area codes, see page 5.
* The AM tuning scale can be changed (page 39).
1Press TUNER repeatedly to
select the FM or AM band.
2Press TUNING + or TUNING –.
Press TUNING + to scan from low to
high; press TUNING – to scan from high
to low.
The receiver stops scanning whenever a
station is received.
Using the controls on the
receiver
1Turn INPUT SELECTOR to select the FM
or AM band.
2Press TUNING MODE repeatedly to select
“AUTO”.
3Press TUNING + or TUNING –.
In case of poor FM stereo
reception
If the FM stereo reception is poor and “ST”
flashes on the display, select monaural audio
so that the sound will be less distorted.
1Press AMP MENU.
2Press V/v repeatedly to select “TUNER”,
then press or b.
3Press V/v repeatedly to select
“FM MODE”, then press or b.
4Press V/v repeatedly to select “MONO”,
then press .
5To return to stereo mode, repeat steps 1 to 4
and select “STEREO” in step 4.
Tuner Operations
Area code FM AM
U2, CA2 100 kHz 10 kHz*
ECE, CEK, AU1 50 kHz 9 kHz
.
mM
>
Xx
BD DVD SAT/
CATV
VIDEO SA-CD/
CD
DMPORT TUNER
O
TV
MENU
TUNING
+/–
Numeric
buttons
SHIFT
ENTER
D. TUNING
TUNER
,
V/v/B/b
AMP
MENU