Sony 4-168-043-14(1) , SYSTEM menu

65GB

Advanced Operations

xSW LEVEL

Lets you set the level of the subwoofer to 0 dB

or +10 dB when multi channel Linear PCM

signals are input via an HDMI connection. You

can set the level for each HDMI input

independently.

• SW AUTO

Automatically sets the level to 0 dB or

+10 dB depending on the frequency.

• SW +10 dB

• SW 0 dB

Note

This parameter is only available when HDMI input

signals are detected.

xSW L.P.F.

Lets you set the low pass filter of the

subwoofer when multi channel Linear PCM

signals are input via an HDMI connection. Set

the “SW L.P.F.” if your connected

subwoofer’s crossover frequency do not have

low pass filter.

• L.P.F. ON

The low pass filter of the subwoofer’s cut off

frequency is set to 120 Hz.

• L.P.F. OFF

The low pass filter of the subwoofer is

turned off.

Note

This parameter is only available when HDMI input

signals are detected.

xARC

Lets you enjoy the TV sound from the

speakers connected to the receiver via an

HDMI cable. For details, see “Enjoying the

TV sound via an HDMI cable” (page 51).

• ARC ON

Audio signal is input to the HDMI TV OUT

jack.

• ARC OFF

Audio signal is output through the TV

OPTICAL IN jack or TV AUDIO IN jack.

Note

This parameter is not available when

“CTRL.HDMI” is set to “CTRL OFF”.

You can customize the settings of the receiver.

xDIMMER

Lets you adjust the brightness of the display in

3 levels.

xSLEEP

Lets you set the Sleep Timer on the receiver to

turn off automatically at the specific time. For

details, see “Using the Sleep Timer” (page 37).

xAUTO.STBY

Lets you set the receiver switch to standby

mode automatically after 30 minutes when

you do not operate the receiver or when there

is no signals input to the receiver.

• STBY ON

Switches to standby mode after

approximately 30 minutes.

• STBY OFF

Does not switch to standby mode.

Notes

• This function does not work when TUNER input is

selected.

• If you use the auto standby mode and the Sleep

Timer at the same time, the Sleep Timer has

priority.

xNAME IN

Lets you set the name of inputs. For details,

see “Naming inputs” (page 36).

SYSTEM menu

Contents

Main To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. For customers in the United States WARNING Owners Record Important Safety Instructions CAUTION For customers in Europe For customers in Australia About This Manual On Copyrights About area codes Table of Contents Connections Preparing the Receiver Basic Operations Tuner Operations Supplied accessories Description and location of parts Front panel 54312 qs 89q;qa 67 Indicators on the display q; 9 8 1234 56 7 Page Rear panel 6 5 1 132 1, 2 4 AAudio signal section Remote commander Using the SHIFT (Q) and TV (R) button To control the receiver To control a Sony TV Press and hold TV (R) and then press the yellow printing button to select the function you want. Page To control other Sony components Inserting batteries into the remote 1: Installing the speakers Example of a 5.1 channel speaker system configuration Connections Note Tips 2: Connecting the speakers Before connecting the cords, be sure to disconnect the AC power cord (mains lead). Subwoofer*Surround speaker LeftRight FRONT 3: Connecting the TV Before connecting cords, be sure to disconnect the AC power cord (mains lead). b) a) CE Tip 4a: Connecting the audio components Notes on connecting DIGITAL MEDIA PORT adapter BVideo cord (not supplied) To detach the DIGITAL MEDIA PORT adapter from DMPORT jack 4b: Connecting the video components If you want to connect several digital components, but cannot find an unused input HDMI features Components to be connected Connecting components with HDMI jacks AAA AHDMI cable (not supplied) Notes on connecting cables Notes on HDMI connections The following illustration shows how to connect a DVD player or DVD recorder. ACoaxial digital cord (not supplied) Connecting a DVD player, DVD recorder AD B*C DVD player, DVD recorder Audio signals Video signals Connecting a Satellite tuner, Cable TV tuner BA CD SAT Video signalsAudio signals D Connecting components with analog video and audio jack VCR, DVD recorder Audio signals Video signals AVideo cord (not supplied) BAudio cord (not supplied) 5: Connecting the antennas (aerials) To the wall outlet FRONT 6: Connecting the AC power cord (mains lead) Connect the AC power cord (mains lead) to a wall outlet. Initializing the receiver 1 receiver. 2 Calibrating the appropriate speaker settings automatically 1 microphone to the AUTO CAL MIC jack. 2 microphone. 2 Error and warning codes To cancel Auto Calibration After you have finished When error codes appear To rectify the error Error codes and remedies When warning codes appear To change the settings manually 1 2 3 4 5 Adjusting the speaker levels (TEST TONE) 2 LEVEL, then press or b. 3 Playback 1 4 2 3 5 1 to select the input you want to create an index name for. 2 3 SYSTEM, then press or b. 4 Using the Sleep Timer media 2 3 4 Listening to FM/AM radio 1 select the FM or AM band. 2 Using the controls on the receiver 1 2 3 4 If you cannot tune in a station 1 2 3 Tuning into a station directly (Direct Tuning) Changing the AM tuning scale Presetting FM/AM radio stations 1 2 3 4 1 Naming preset stations 2 Using the controls on the receiver 1 2 3 4 5 6 Using the Radio Data System (RDS) (For customers in Europe and 2 channel sound mode Receiving RDS broadcasts Selecting the sound field xA.DIRECT (Analog direct) Movie mode xA.F.D. AUTO (A.F.D. Auto) xMULTI ST. (Multi Stereo) When headphones are connected Page Page What is BRAVIA Sync? Preparing for the BRAVIA Sync If your TV is compatible with the Control for HDMI-Easy Setting function 1 2 Playing back components with one-touch operation (One-Touch Play) Enjoying the TV sound from the speakers connected to the receiver Sets System Audio (System Audio Control) Turns on (if in Control to on standby mode) Switches to appropriate HDMI input Minimizes TV Outputs TV volume sound Turning off the receiver with the TV (System Power Off) Press and hold TV, then press TV ?/1. Enjoying movies with the optimum sound field (Theater/Theatre Mode Sync) Enjoying the TV sound via an HDMI cable (Audio Return Channel) 2 Switching between digital and analog audio Advanced Operations (INPUT MODE) 1 2 Enjoying the sound from other inputs 2 3 4 5 Assigning input jacks Enjoying sound/images from the components connected to the DIGITAL MEDIA PORT 1 2 component. Using the setting menu Overview of the menus Advanced Operations Page (For customers in Europe and LEVEL menu xT. TONE Adjusting the speaker level SPEAKER menu 3/2 1. xFRT SIZE xCNT SIZE xSUR SIZE xFL DIST. xFR DIST. xCNT DIST. SURROUND menu EQ menu xFM MODE xNAME IN xA/V SYNC xDUAL HDMI menu xCTRL.HDMI xPASS.THRU xAUDIO.OUT xSW LEVEL SYSTEM menu xSW L.P.F. xARC Changing the input button assignments 1 button of which you want to change the assignment, hold down AV ?/1. 2 release the input button you selected in step 1. Clearing all the contents of the remotes memory 2 RM-AAU071 only RM-AAU074 only Glossary xDeep Colour (Deep Color) xDigital Cinema Sound (DCS) xDolby Digital xDolby Pro Logic II xDolby Surround (Dolby Pro Logic) Precautions On safety On power sources On heat buildup On placement Troubleshooting Audio Page Video Tuner Control for HDMI Remote commander Others Error messages Specifications FM tuner section AM tuner section Video section General Design and specifications are subject to change without notice. Index