42GB
Using the Radio Data
System (RDS)
(For customers in Europe and
Australia only)
This receiver allows you to use Radio Data
System (RDS), which enables radio stations to
send additional information along with the
regular program signal. This receiver offers
convenient RDS features, such as program
service name display.
Notes
• RDS is operable only for FM stations.
• Not all FM stations provide RDS service, nor do
they provide the same type of services. If you are
not familiar with the RDS services in your area,
check with your local radio stations for details.
Simply select a station on the FM
band using Direct Tuning (page 39),
Automatic Tuning (page 38), or
Preset Tuning (page 41).
When you tune in a station that provides RDS
services, “RDS” lights up and the program
service name appears on the display.
Note
RDS may not work properly if the station you tuned
to is not transmitting the RDS signal properly or if
the signal strength is weak.
Tip
When a program service name is displayed, you can
check the frequency by pressing DISPLAY
repeatedly (page 36).
Selecting the sound field
This receiver can create multi channel
surround sound. You can select one of the
optimized sound fields from the receiver’s
preprogrammed sound fields.
Press SOUND FIELD +/– repeatedly
to select the sound field you want.
You can also press 2CH/A.DIRECT, A.F.D.,
MOVIE or MUSIC on the receiver.
You can switch the output sound to 2 channel
sound regardless of the recording formats of
the software you are using, the playback
component connected, or the sound field
settings of the receiver.
x2CH ST. (2 Channel Stereo)
The receiver outputs the sound from the front
left/right speakers only. There is no sound
from the subwoofer.
Standard 2 channel stereo sources completely
bypass the sound field processing and multi
channel surround formats are downmixed to 2
channel except LFE signal.
Receiving RDS broadcasts
Enjoying Surround Sound
2 channel sound mode
.>
Xx
SOUND
FIELD +/–