How to Use the Camera
EXPOSURE
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.BACKLIGHT OFF
5.SSNR ON
6.DAY/NIGHT AUTO
7.IMAGE ADJ
8.SPECIAL
9.EXIT
1. When the SETUP menu screen is displayed, select EXPOSURE by using the Up and Down buttons so that the arrow indicates EXPOSURE .
2. Select a desired mode using the Up and Down buttons.
SHUTTER : You can select either auto or manual shutter.
-A.FLK : Select this when you experience picture flicker, which can happen when there is a clash with the frequency of the installed lighting.
-ESC : Select this to control the shutter speed automatically. If ESC is selected, the shutter speed is automatically controlled depending on the ambient illumination of the subject.
-MANUAL : You can control shutter speed manually.
Notes
¥When the SHUTTER is set to ESC after selecting the Internal Synchronization Type, the picture may become unstable if the camera faces a bright fluorescent light. Therefore, take care when choosing the installation position.
¥ESC and MANUAL modes are only available together when the lens is set to
MANUAL.
¥When the SHUTTER is set to MANUAL or A.FLK mode,
AGC (AUTO GAIN CONTROL):
The higher the gain level, the brighter the screen - but the higher the noise.
-OFF : Deactivates the AGC function.
-LOW : Allows automatic gain control from 0 to 30dB.
-HIGH : Allows automatic gain control from 0 to 42dB.
SENS-UP :
When it is night or dark, the camera automatically detects the light level and maintains a clear picture if this mode is activated.
- OFF : Deactivates the
- AUTO : Activates the
RETURN :
Select this to save the changes in the EXPOSURE menu and return to the SETUP menu.
Notes
¥If you press the SET button in ÔAUTOÕ mode, You can adjust brightness by increasing or decreasing the shutter speed. (X2~X256)
¥Note that the higher the zoom level, the brighter the screen, but the more likely it is that an
¥Although Noise, Spots, and Whitish symptoms may occur in
COLOR CCD CAMERA 26 User’s Manual | COLOR CCD CAMERA 27 User’s Manual |
