![](/images/new-backgrounds/1286524/28652415x1.webp)
Overview
Rear View
Function Setup Button
SET Button : Displays the menu on the screen. Press this button to confirm status or after changing a selected item.
Up and Down Button : Used to move the cursor up or down in the menu screen to select a desired menu item.
Left and Right Button : Used to move the cursor left or right in the menu screen or to change the value of the selected item.
D & N Input Port
You can switch to Day & Night Mode by connecting an external signal to this port.
MD Output Port
Motion detection signals are output through this port.
RS-485 Control Port
![](/images/new-backgrounds/1286524/28652415xi5.webp)
You can control SETUP MENU through this port by using external controllers like a Remote controller that
Video OUT Port
Video signals are output through this port. Connect this port to the Video IN port of a monitor.
Power LED
When power is properly connected, this LED comes on.
Power IN Port
Connect the power as specified for each model here.
Installation Procedures
Lens
The lens is not supplied with this camera. Purchase a lens suitable for your environment. This camera accepts the auto iris lens and both
Notes
¥It is recommended to use the DC type Auto Iris Lens to effectively enjoy the major functions of this camera.
¥Keep the lens surface clean, since if it is contaminated with dirt or fingerprints the picture quality suffers.
When Using Auto Iris Lens
1. Strip the insulation of the auto iris lens cable 8mm from the end.
approx. 8mm
2. Strip the insulation of the core of the auto iris lens cable to expose a 2mm length.
approx. 2mm
COLOR CCD CAMERA 14 User’s Manual | COLOR CCD CAMERA 15 User’s Manual |