How to Use the Camera
Enter a title, move the cursor to ’POS’ and press the SET button. The entered title appears on the screen. Select the position to display the title on the screen by using the 4 direction buttons and press the SET button. When the position is determined, select ’END’ and press the SET button to return to the SPECIAL menu.
FRONT DOOR |
to Locate, then SET
When the SPECIAL menu screen is displayed, press the Up and Down buttons so that the arrow indicates MOTION DET .
Set up the mode using the 4 direction buttons.
- SENSITIVITY : You can select up to 8 MD areas. When SENSITIVITY number is high, |
motion detection sensitivity is increased to recognize even small movement. |
- AREA MODE : Determines whether to use the MD area selected in SENSITIVITY. |
- SEL POS : Determines which of the 4 vertices of each MD area is to be used. |
- YPOS : Determines the coordinate of the vertical axis for SEL POS. |
- XPOS : Determines the coordinate of the horizontal axis for SEL POS. |
SYNC : In areas where the supply is at 60Hz, you can synchronize the output phase of multiple cameras using the power synchronization function
- INT : Internal Synchronization Type
-L/L : Power Synchronization Type,
• Press the SET button.
• You can select a desired phase from 0 to 359 when select 'phase'.
• You can decide the synchronization between luminance and color signal when select the 'mode'.
Notes
¥When using AC power at 60Hz frequency, you can use the L/L type synchronization.
¥When the power is DC 12V, the SYNC. menu is fixed to the ÔINTÕ mode.
MOTION DET:
If you connect an alarm device to this camera, you can monitor activity more efficiently, because a signal is generated by the camera whenever motion is detected. The motion detection signal is output through the MD OUT port.
- FILL SET : Fills in a selected MD area. Fills in a selected MD area. The color of filling is |
sequentially selected as brown, orange, blue, cyan, yellowish green, yellow |
and red. |
- RETURN : Select this to save the MOTION DET menu settings and return to the SPECIAL |
menu. |
Notes
¥MD areas show only MOTION DET menu. Therefore, MD areas donÕt display on the monitor screen.
PRIVACY : Hide an area you want to hide on the screen.
When the SPECIAL menu screen is displayed, press the Up and Down buttons so that the arrow indicates ‘PRIVACY’.
Set up the mode using the 4 direction buttons.
- AREA SEL : You can select up to 8 MD areas. - AREA MODE :
Determines whether to use the area selected in the AREA SEL, and the size and position of the area.
COLOR CCD CAMERA 38 User’s Manual | COLOR CCD CAMERA 39 User’s Manual |
