Manuals / Brands / Home Audio / Home Theater System / Sony / Home Audio / Home Theater System

Sony 5950DP, 6900DP, HT-9900M 57US, Information Additional, HT-5950DPonly (SA-WMSP87), AUDIO POWER SPECIFICATIONS, Surround back speaker (SS-MSP67SB)

1 60

Download 60 pages, 1.95 Mb

Dimension (w/h/d) (Approx.)

Front speakers	130 × 220 × 120 mm
	(5 1/8 × 8 5/8 × 4 6/8
	inches)
Center speaker	245 × 108 × 120 mm
	(9 5/8 × 4 2/8 × 4 6/8
	inches)
Surround/surround back speakers
	115 × 168 × 120 mm
	(4 4/8 × 6 5/8 × 4 6/8
	inches)
Mass (Approx.)
Front speakers	1.7 kg (3 lb 12 oz)
Center speaker	1.6 kg (3 lb 9 oz)

Surround/surround back speakers

1.1 kg (2 lb 7 oz)

HT-5950DP only

Front speakers (SS-MSP67L/ SS-MSP67R)Center speaker (SS-CNP67) Surround speakers (SS-MSP67SL/ SS-MSP67SR)Surround back speaker (SS-MSP67SB)

Front/center speakers	Full range, magnetically
	shielded
Surround/surround back speakers
	Full range
Speaker units	70 mm cone type
Enclosure type	Closed type
Rated Impedance	6 ohms
Dimension (w/h/d) (Approx.)
Front/surround/surround back speakers
	91 × 96 × 102 mm
	(3 1/2 × 3 3/4 × 4 inches)
Center speaker	155 × 96 × 102 mm
	(6 1/8 × 3 3/4 × 4 inches)
Mass (Approx.)
Front speakers	0.65 kg (1 lb 8 oz)
Center speaker	0.75 kg (1 lb 12 oz)

Surround/surround back speakers

0.6 kg (1 lb 6 oz)

HT-9900M and HT-6900DP only (SA-WMSP69)HT-5950DP only (SA-WMSP87)

AUDIO POWER SPECIFICATIONS

POWER OUTPUT AND TOTAL HARMONIC DISTORTION:

With 6 ohm loads, from 28 – 200 Hz; rated 120 watts (SA-WMSP69)/120 watts (SA-WMSP87), minimum RMS power, with no more than 0.8% total harmonic distortion from 250 milliwatts to rated output.

Speaker system	Active subwoofer,
	magnetically shielded
Speaker unit
SA-WMSP69	250 mm cone type
SA-WMSP87	200 mm cone type
Enclosure type	Acoustically loaded bass
	reflex
RMS output:
SA-WMSP69	160 W (5 ohms, 100 Hz,
	THD 10%)
SA-WMSP87	155 W (5 ohms, 100 Hz,
	THD 10%)
Input	LINE IN (input pin jacks)
Power requirements

Area code	Power requirements

U, CA	120 V AC, 60 Hz

Power consumption
SA-WMSP69	120 W
SA-WMSP87	95 W
Dimensions (w/h/d) (Approx.)
SA-WMSP69	337 × 410 × 366 mm
	(13 1/4 × 16 1/8 × 14 1/2
	inches) including front
	panel
SA-WMSP87	270 × 325 × 398 mm
	(10 5/8 × 12 3/4 × 15 5/8
	inches) including front
	panel
Mass (Approx.)
SA-WMSP69	13.0 kg (28 lb 11 oz)
SA-WMSP87	9.0 kg (19 lb 14 oz)

Information Additional

continued

57US

Contents

Page WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture About This Manual Note for the supplied remote For RM-AAP001 Table of Contents 1: Check how to hookup your components Required cords A Audio cord E Coaxial digital cord (supplied) F Monaural audio cord B Audio/video cord 1a: Connecting components with digital audio output jacks 2 Connect the video jacks Hooking up a Super Audio CD/CD player 1b: Connecting components with multi channel output jacks 11US 1c: Connecting components with only analog audio jacks Hooking up video components 13US 2: Connecting the antennas 3: Connecting speakers Required cords A Speaker cords (supplied) B Monaural audio cord (supplied) SPEAKERS FRONT B Installing the speakers on the wall 3 Hang the speakers on the screws 17US 4:Connecting the AC power cord 5: Setting up the speakers 1 Press ?/1 to turn on the receiver 2 Press MAIN MENU repeatedly to select “SET UP” 3 Press or repeatedly to select the parameter you want to adjust 4 Press + or – repeatedly to select the setting you want x SWXXXXXXX (Sub woofer phase polarity) (HT-9900Mand HT-6900DPonly) x SLSRXXXX/XX (Surround speaker position) 20US 6:Setting up the sub woofer 7:Adjusting the speaker levels and balance —TEST TONE Selecting the component Listening to multi channel sound — MULTI CH IN Listening to FM/AM radio Presetting radio stations Changing the display About the indications in the display Playback channel indicators: L C R SL SR 28US — 2CH STEREO Enjoying higher fidelity sound — AUTO FORMAT DIRECT Decoding the input audio signal automatically Press A.F.D. repeatedly to select “A.F.D. AUTO” Enjoying stereo sound in multi channel (2 channel decoding mode) Press A.F.D. repeatedly to select the 2 channel decoding mode xDOLBY PL (PRO LOGIC) Selecting a sound field Selecting a sound field for music Press MUSIC repeatedly to select the sound field you want xHALL xJAZZ (JAZZ CLUB) xCONCERT (LIVE CONCERT) — SURR BACK DECODING How to select the surround back decoding mode When you select “SB AUTO” When you select “SB ON” When you select “SB OFF” 34US Switching the audio input mode for digital components — INPUT MODE Customizing sound fields Adjusting the tone Advanced settings xDUAL (Digital broadcast language selection) xCOMP. V. A (Component video input assignment) xNAME IN Naming preset stations and inputs Using the Sleep Timer Selecting the speaker system Recording Insert a blank video tape into the VCR (VIDEO 1) for recording Select the program source to be recorded Prepare the component for playing Recording on a video tape 42US Before you use your remote Remote button description 44US the 45US 46US Selecting the command mode of the remote Programming the remote The numeric codes corresponding to the component and the maker of the component To control a CD player To control a DAT deck To control an MD deck To control a tape deck To control a VCR To control a DVD player To control a TV To control a satellite tuner or cable box To control a tuner Page Precautions Troubleshooting Dolby Digital or DTS multi channel sound is not reproduced Recording cannot be done The FM reception is poor Radio stations cannot be tuned in Remote control Specifications FM tuner section AM tuner section Video section General Speaker section Front speakers (SS-MSP67L/ SS-MSP67R) Center speaker (SS-CNP67)Surround speakers (SS-MSP67SL/ SS-MSP67SR) Surround back speaker (SS-MSP67SB) HT-9900Mand HT-6900DPonly (SA-WMSP69) HT-5950DPonly (SA-WMSP87) Supplied accessories 58US List of button locations and reference pages Index