Manuals / Brands / Home Audio / Home Theater System / Sony / Home Audio / Home Theater System

Sony 5950DP, 6900DP, HT-9900M 56US, General, Video section, Speaker section, FM tuner section, AM tuner section, Surround back speaker (SS-MSP69SB)

1 60

Download 60 pages, 1.95 Mb

Inputs (Analog)

MULTI CH IN*,	Sensitivity: 800 mV
SA-CD/CD, MD/TAPE,	Impedance: 50 k ohms
DVD, VIDEO 1, 2, 3

* HT-9900M and HT-6900DP only.

Inputs (Digital)

DVD (Coaxial)	Sensitivity: –
	Impedance: 75 ohms

VIDEO 2, SA-CD/CD	Sensitivity: –
(Optical)	Impedance: –

Outputs (Analog)

MD/TAPE (OUT),	Voltage: 800 mV
VIDEO 1 (AUDIO OUT)	Impedance: 10 k ohms

SUB WOOFER	Voltage: 2 V
	Impedance: 1 k ohm

Reproduction frequency range:
	28 – 20,000 Hz
Tone

Gain levels	±6 dB, 1 dB step

FM tuner section
Tuning range	87.5 - 108.0 MHz
Antenna	FM wire antenna
Antenna terminals	75 ohms, unbalanced
Intermediate frequency	10.7 MHz
AM tuner section
Tuning range
Model of area code U, CA	530 – 1,710 kHz3)
With 10-kHz tuning scale:	530 – 1,710 kHz3)
With 9-kHz tuning scale:	531 – 1,710 kHz3)
Antenna	Loop antenna
Intermediate frequency	450 kHz

3)You can change the AM tuning scale to 9 kHz or 10 kHz. After tuning in any AM station, turn off the receiver. While holding down PRESET TUNING + or TUNING +, press ?/1. All preset stations will be erased when you change the tuning scale. To reset the scale to 10 kHz (or 9 kHz), repeat the procedure.

Video section

Inputs/Outputs
Video:	1 Vp-p, 75 ohms
COMPONENT VIDEO: Y: 1 Vp-p, 75 ohms
	PB/CB/B-Y: 0.7 Vp-p,
	75 ohms
	PR/CR/R-Y: 0.7 Vp-p,
	75 ohms
	80 MHz HD Pass Through

General

Power requirements

Area code	Power requirements
U, CA	120 V AC, 60 Hz

Power consumption

Area code	Power consumption

U (STR-K9900P)	190 W

U (STR-K5900P)	140 W

CA	200 VA

Power consumption (during standby mode)
	0.2 W
Dimensions (w/h/d) (Approx.)
	430 × 157.5 × 310 mm
	(16 7/8 × 6 2/8 × 12 2/8
	inches) including
	projecting parts and
	controls
Mass (Approx.)	8.0 kg (17 lb 11 oz)

Speaker section

HT-9900M and HT-6900DP only

Front speakers (SS-MSP69L/SS-MSP69R) Center speaker (SS-CNP69)Surround speakers (SS-MSP69SL/ SS-MSP69SR)Surround back speaker (SS-MSP69SB)

Front speakers	2-way, magnetically
	shielded
Center speaker	Full range, magnetically
	shielded
Surround/surround back speakers
	Full range
Speaker units
Front speakers	80 mm cone type,
	25 mm balance dome
Center speaker	57 mm cone type × 2
Surround/surround back speakers
	80 mm cone type
Enclosure type	Bass reflex
Rated Impedance	6 ohms

56US

Contents

Page WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture About This Manual Note for the supplied remote For RM-AAP001 Table of Contents 1: Check how to hookup your components Required cords A Audio cord E Coaxial digital cord (supplied) F Monaural audio cord B Audio/video cord 1a: Connecting components with digital audio output jacks 2 Connect the video jacks Hooking up a Super Audio CD/CD player 1b: Connecting components with multi channel output jacks 11US 1c: Connecting components with only analog audio jacks Hooking up video components 13US 2: Connecting the antennas 3: Connecting speakers Required cords A Speaker cords (supplied) B Monaural audio cord (supplied) SPEAKERS FRONT B Installing the speakers on the wall 3 Hang the speakers on the screws 17US 4:Connecting the AC power cord 5: Setting up the speakers 1 Press ?/1 to turn on the receiver 2 Press MAIN MENU repeatedly to select “SET UP” 3 Press or repeatedly to select the parameter you want to adjust 4 Press + or – repeatedly to select the setting you want x SWXXXXXXX (Sub woofer phase polarity) (HT-9900Mand HT-6900DPonly) x SLSRXXXX/XX (Surround speaker position) 20US 6:Setting up the sub woofer 7:Adjusting the speaker levels and balance —TEST TONE Selecting the component Listening to multi channel sound — MULTI CH IN Listening to FM/AM radio Presetting radio stations Changing the display About the indications in the display Playback channel indicators: L C R SL SR 28US — 2CH STEREO Enjoying higher fidelity sound — AUTO FORMAT DIRECT Decoding the input audio signal automatically Press A.F.D. repeatedly to select “A.F.D. AUTO” Enjoying stereo sound in multi channel (2 channel decoding mode) Press A.F.D. repeatedly to select the 2 channel decoding mode xDOLBY PL (PRO LOGIC) Selecting a sound field Selecting a sound field for music Press MUSIC repeatedly to select the sound field you want xHALL xJAZZ (JAZZ CLUB) xCONCERT (LIVE CONCERT) — SURR BACK DECODING How to select the surround back decoding mode When you select “SB AUTO” When you select “SB ON” When you select “SB OFF” 34US Switching the audio input mode for digital components — INPUT MODE Customizing sound fields Adjusting the tone Advanced settings xDUAL (Digital broadcast language selection) xCOMP. V. A (Component video input assignment) xNAME IN Naming preset stations and inputs Using the Sleep Timer Selecting the speaker system Recording Insert a blank video tape into the VCR (VIDEO 1) for recording Select the program source to be recorded Prepare the component for playing Recording on a video tape 42US Before you use your remote Remote button description 44US the 45US 46US Selecting the command mode of the remote Programming the remote The numeric codes corresponding to the component and the maker of the component To control a CD player To control a DAT deck To control an MD deck To control a tape deck To control a VCR To control a DVD player To control a TV To control a satellite tuner or cable box To control a tuner Page Precautions Troubleshooting Dolby Digital or DTS multi channel sound is not reproduced Recording cannot be done The FM reception is poor Radio stations cannot be tuned in Remote control Specifications FM tuner section AM tuner section Video section General Speaker section Front speakers (SS-MSP67L/ SS-MSP67R) Center speaker (SS-CNP67)Surround speakers (SS-MSP67SL/ SS-MSP67SR) Surround back speaker (SS-MSP67SB) HT-9900Mand HT-6900DPonly (SA-WMSP69) HT-5950DPonly (SA-WMSP87) Supplied accessories 58US List of button locations and reference pages Index