Sony A900 Protect, DPOF setup, You can protect images against accidental erasure, DPOF specifications are left with images after printing

Protect

You can protect images against accidental erasure.

Marked images	Protects selected images or cancels the protection of the
	selected images.
	1Select the image you want to protect with b/B on the
	multi-selector, then press the center of the multi-selector.
	(To cancel a selection, press the center again.)
	To protect other images or cancel the protection of other
	images, repeat this step.
	2Press the MENU button. After a message appears, select
	[OK] with v on the multi-selector, then press the center of
	the multi-selector.
All images	Protects all the images or cancels the protection of all the
	images in the memory card. After a message appears, select
Cancel all
	[OK] with v on the multi-selector, then press the center of
	the multi-selector.

DPOF setup

Using the camera, you can specify the images and the number of images to print before you print images at a shop or with your printer.

DPOF specifications are left with images after printing.

Marked images	Specifies/unspecifies DPOF on the selected images.
	1Select the image you want to specify DPOF with b/B on
	the multi-selector, then select the number of sheets with
	the rear control dial. (To unspecify DPOF, set the number
	to “0.”)
	To specify/unspecify DPOF on other images, repeat this
	step.
	2Press the MENU button. After a message appears, select
	[OK] with v on the multi-selector, then press the center of
	the multi-selector.
All images	To specify/unspecify DPOF on all the images in the memory
	card. When [All images] is selected, set the number of
Cancel all
	images with v/V on the multi-selector, then press the center
	of the multi-selector. After a message appears, select [OK]
	with v on the multi-selector, then press the center of the
	multi-selector.

Notes

•You cannot specify DPOF on RAW images.

•You can specify any number up to 9.

124