For details on High Speed Sync, refer to the operating instructions supplied with the flash.

Using a flash equipped with a flash sync terminal cord

Open the cover of the (flash sync) terminal and plug the cord in.

(flash sync) terminal

You can use a flash equipped with a flash sync terminal of the opposite polarity.

Notes

Select the manual exposure mode and set the shutter speed to 1/200 second with the SteadyShot on or 1/250 second with the SteadyShot off. If the shutter speed recommended on the flash is slower than that, use the recommended speed or an even slower speed.

Use a flash with a flash sync voltage of 400 V or less.

Before you connect the flash sync cord to the (flash sync) terminal, turn off the power of the connected flash. If the power is on, it may flash when you connect the cord.

The flash will always be full emission. Flash compensation (page 73) cannot be used.

Using auto white balance is not recommended. Use custom white balance to gain more precise white balance.

The flash indicator is not displayed when the (flash sync) terminal is plugged in.

68