Program Shift

You can temporarily change the shutter speed and aperture value combination with the correct exposure determined by the camera maintained.

1 Press the shutter button halfway

 

Shutter speed

down to adjust the focus.

 

 

 

 

 

 

Aperture value

The shutter speed and aperture value are

 

 

 

 

 

 

 

 

 

 

 

 

indicated.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2 Rotate the front or rear control dial to select your desired combination while the focus is achieved.

Rotating the front control dial sets the exposure mode indicator to “PS” (Shutter speed priority Program Shift) and rotating the rear control dial sets the exposure mode indicator to “PA” (Aperture priority Program Shift).

Shutter speed Aperture

PSvalue

Notes

If you turn the camera off and on or a certain period of time is passed, Program Shift “PS” or “PA” is canceled and returned to “P.”

When Program Shift “PS” is selected, the (Camera shake warning) indicator is not displayed.

When a flash (not supplied) attached to the camera is turned on, Program Shift does not operate.

52