Camera shake warning indicator

Due to potential camera shake, the (Camera shake warning) indicator flashes in the viewfinder.

Note

The (Camera shake warning) indicator is displayed only in the exposure modes that the shutter speed is automatically set. This indicator is not displayed in M/S/PS modes.

SteadyShot scale indicator
Setting the

switch to “ON” turns on

the

 

(SteadyShot scale) indicator. Wait

 

 

until the camera shake is reduced and the scale becomes low, then start shooting. This SteadyShot function can reduce the effect of camera shake by the equivalent

of approximately 2.5 to 4 increments of shutter speed.

Note

switch

The SteadyShot function may not work optimally when the power has just been turned on, just after you aim the camera, or when the shutter button has been pressed all the way down without stopping halfway. Wait for the (SteadyShot scale) indicator scale to go down, and then press the shutter button down slowly.

46