Precautions

Installation

Avoid placing the drive in a location subject to:

high humidity

high temperature

mechanical shock and vibration

direct sunlight

Operation

Do not move the drive while it is operating. It may cause malfunction.

Avoid exposing the drive to sudden changes from a low to high in temperature. This may cause water condensation to collect inside the drive. If the ambient temperature should suddenly rise while the drive is turned on , wait at least one hour before turning on the drive. If you attempt to operate the drive immediately after a sudden increase in temperature, a malfunction may occur.

Turning off the power to the drive while it is writing to tape may cause the tape to become unreadable. All previously negotiated parameters will be lost, whenever power to the drive is cycled.

Upon execution of the hardware reset hole, the driver will be reset and there is a risk of lost and unreadable data. Thus, please do not use the hole other than repair purposes. (See page 13)

Transportation

Keep the original packing materials to facilitate transportation of the drive.

Always remove the tape before moving the drive. After removing the drive from the computer, repack the drive into its original packing.

5

Page 5
Image 5
Sony AITi260 manual Precautions, Installation, Operation, Transportation