Example of Scsi set-up | Sony AITi260 instruction

Notice of SCSI Termination

The AITi260 conform to the Microsoft PC97 standard which requires the internal (naked) drive to be terminated with an external terminator.

Microsoft PC97 SCSI requirements

SCSI peripherals must not terminate the bus. Both internal and external cable ends are instead terminated by plug-in connectors.

Host Computer Wide SCSI

68p cable

Terminator

This drive

Example of SCSI set-up

6

Image 6

Sony AITi260 manual Example of Scsi set-up

Contents

AIT Drive Contents AITi260 Tape Drive Product Features Introduction Operation PrecautionsInstallation Transportation Example of Scsi set-up Installation Scsi Connection/Setting the Scsi IDParity Disable Jumper Option Switches DIP Switch DIP Switch PositionsData Compression Control DIP switch Mounting Holes For 3.5 Standard Height For 5.25 Half Height Depth 0.10 in max Remodeling from 5.25 Model to 3.5 Model Orientation LED Indication for Drive Status OperationLocation of 3 LEDs Front Panel for 3.5 Standard Height Loading a Cassette Using a Cleaning TapeDrive Operation Unloading a Cassette Emergency Cassette Removal Procedure Return the drive to Sony for repair Tape guide surface Supported Scsi Commands Interface ImplementationSupported Scsi Messages Specification Product Specifications Suspended Particulate Temperature and Humidity RangePower Requirements Air-cooling Requirement Operating Systems Backup Software Vendors Phone Numbers Third Party Support Contacts In the USA Backup Software Vendors Phone Numbers Sony Electronics Inc., Technical Support Sony ContactsFor further information, please contact Computer Peripherals Product Marketing Sony Korea Corporation Edmk CP Sales & Marketing Team Sony Gulf FZE Computer Display & Peripheral DivSony Marketing of Japan