Notes

Do not push the disc tray when closing it. Press Z on the receiver or OPEN/CLOSE on the remote to close the disc tray.

If DVD playback is paused for approximately one hour, the receiver automatically turns off.

Replacing Discs While Playing a Disc

You can open the disc tray while playing a disc, to check what discs are to be played next or replace discs without interrupting play of the current disc.

DISC SKIP

VOLUME

EX-CHANGE

1 Press EX-CHANGE.

The disc tray opens and two disc compartments appear. Playback of the current disc continues.

2 Replace discs in the compartments with new ones.

The receiver plays the disc in the left side compartment after the current disc, and then the one in the right side compartment.

3 Press DISC SKIP.The disc tray turns and other two disc compartments appear.4 Replace discs in the compartments with new ones.5 Press EX-CHANGE.The disc tray closes.

Notes

Do not push the disc tray to close it in Step 5, as you may damage the receiver.

If “REMOVE” is displayed in the front panel display, remove the disc in front of you and turn off the receiver once, and then turn it on again.

Discs Playing
25US