Register the other unit’s remote function (Learn Function)

You can register additional functions to the supplied remote button from the other unit's remote.

Even though the supplied remote may not have some functions or buttons to operate the VCR or other unit, you can use additional functions with this function.

RM SET UP

TV ?/1

Cursor key

1 Press RM SETUP and TV ?/1 simultaneously.

The RM SET UP indicator lights up and “LEARN” appears in the remote’s display.

2 Select “VIDEO1,” “VIDEO2,” “TV/SAT,” or “MD/DAT” you want to register using Cursor key, and then push Cursor key. When you want to register the TV function, press TV ?/1.

“VIDEO1,” “VIDEO2,” “TV/SAT,” “MD/ DAT,” or “TV KEY” appears in the remote’s display and the RM SET UP indicator lights up.

3 Place face to face the sensors of the supplied remote and the remote to which you want to register a remote function.

4 Press the button where you want to register on the supplied remote.

The RM SET UP indicator blinks on and off if you press the button which can be registered on the supplied remote.

5 Press the button you want to register an operation for the other unit and send the code to the supplied remote.

The RM SET UP indicator blinks on and off while sending the code from the remote of the other unit.

xWhen registration is completed

The RM SET UP indicator flashes twice slowly.

xWhen registration is incomplete

The RM SET UP indicator flashes 4 times quickly, “Error” appears in the remote's display, and then returns to step 5.

xIf memory is full

The RM SET UP indicator flashes 8 times quickly and “Full” appears in the remote’s display. Then the remote returns to normal mode.

If you press TV/1 before step 5

When you press TV/1 in step 2, the operation returns to step 4 and you can change the button you want to register.

When you select the function using Cursor key in step 2, the operation returns to step 5 and you just change the other unit’s code.

If you want to clear the function you registered

Before step 5, push TV/1 for more than 2 seconds before sending the code. “CLEAR” appears in the remote’s display and the function you registered is cleared.

Notes

•Depending on the function code, you cannot register the function to the supplied remote.

•Some buttons on the supplied remote are not available with this function.

Tip

You can register a function to each number on the remote. Press NUM and select a number instead of pressing the button in step 5.

64US