57US
BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100
4-446-733-11(1)
D:\NORM'S JOB\SONY HA\SO120029\BDV-
E6100_4100_3100_E2100\4446733111_US (U2)\100ADD.fm
masterpage: Right
Additional Information
An image is not displayed on the
entire TV screen.
tCheck the setting of [TV Type] in
[Screen Settings] (page 46).
tThe aspect ratio on the disc is fixed.
Color irregularity occurs on the TV
screen.
tIf the speakers are used with a CRT-
based TV or projector, install the
speakers at least 0.3 meters (1 foot)
from the TV set.
tIf the color irregularity persists, turn
off the TV set once, then turn it on after
15 to 30 minutes.
tMake sure that no magnetic object
(magnetic latch on a TV stand, health
care device, toy, etc.) is placed near the
speakers.
There is no sound.
tThe speaker cords are not connected
securely.
tCheck the speaker settings (page 40).
There is no sound from the TV via the
HDMI (OUT) jack when using the
Audio Return Channel function.
tSet [Control for HDMI] in [HDMI
Settings] of [System Settings] to [On]
(page 50). Also, set [Audio Return
Channel] in [HDMI Settings] of
[System Settings] to [Auto] (page 50).
tMake sure that your TV is compatible
with the Audio Return Channel
function.
tMake sure that an HDMI cable is
connected to a jack on your TV that is
compatible with the Audio Return
Channel function.
The system does not output sound of
TV programs correctly when
connected to a set-top box.
tSet [Audio Return Channel] in [HDMI
Settings] of [System Settings] to [Off]
(page 50).
tCheck the connections (page 20).
Severe hum or noise is heard.
tMove your audio equipment away
from the TV.
tClean the disc.
The sound loses stereo effect when
you play a CD.
tSelect stereo sound by pressing
AUDIO (page 37).
The sound outputs from the center
speaker only.
tDepending on the disc, the sound may
output from the center speaker only.
No sound or only a very low-level
sound is heard from the surround
speakers.
tCheck the speaker connections and
settings (pages 18, 40).
tCheck the sound mode setting
(page 24).
tDepending on the source, the effect of
the surround speakers may be less
noticeable.
tA 2-channel source is being played.
Distortion occurs in the sound of a
connected equipment.
tReduce the input level for the
connected equipment by setting
[Attenuate - AUDIO] (page 48).
A sudden loud music is heard.
tThe build-in sound demonstration is
activated. Press VOL – to reduce the
volume or press x to stop the
demonstration.
Sound