27US
BDV-N9100W/BDV-N8100W/BDV-N7100W
4-456-334-12(1)
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF
01)\4456334121_US (U)\040GET.fm
masterpage: Right
Getting Started

Rear of the main unit

•Be sure to fully extend the FM wire antenna
(aerial).
•After connecting the FM wire antenna (aerial),
keep it as horizontal as possible.
If you have poor FM reception, use a 75-ohm
coaxial cable (not supplied) to connect the main
unit to an outdoor FM antenna (aerial).
Step 3: Preparing for Network Connection
To connect the system to your network, perform
[Easy Network Settings]. For details, see “Step 5:
Performing the Easy Setup” (page31).
Select the method based on your LAN
(Local Area Network) environment.
• If you use a wireless LAN
The system has built-in Wi-Fi, and you
can connect the system to the network by
making the network settings.
• If you use other than a wireless LAN
Use a LAN cable to connect to the LAN
(100) terminal on the main unit.
A shielded interface cable (LAN cable),
straight or crossover, is recommended.

Connecting the antenna

(aerial)

Note
Tip
FM wire antenna (aerial)
(supplied)
or
Tip
Tip
Broadband router
LAN cable (not supplied)