31US
BDV-N9100W/BDV-N8100W/BDV-N7100W
4-456-334-12(1)
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF
01)\4456334121_US (U)\040GET.fm
masterpage: Right
Getting Started
Step 5: Performing the Easy Setup

Before performing Step 5

Follow the Steps below to make the basic
adjustments and network settings for the
system.
Displayed items vary depending on the
area.
1Insert two R03 (AAA) batteries
(supplied) by matching the 3
and # ends on the batteries to
the markings inside the
compartment.
2Turn on the TV.
3Connect the calibration mic to
the A.CAL MIC jack on the rear
panel.
Set up the calibration mic at ear level
using a tripod, etc. (not supplied). The
calibration mic should aim the TV
screen. The front of each speaker
should face the calibration mic, and
there should be no obstruction between
the speakers and the calibration mic.
4Press [/1 to turn on the system.
5Switch the input selector on
your TV so that the signal from
the system appears on the TV
screen.
The [Easy Initial Settings] for OSD
language selection appears.
6Perform [Easy Initial Settings].
Follow the on-screen
instructions to make the basic
settings using B/V/v/b and .
For details about [Auto Calibration],
see “Calibrating the Appropriate
Speaker Settings Automatically”
(page50).
7After completing the [Easy Initial
Settings], press V/v to select
[Easy Network Settings], then
press .
The [Easy Network Settings] display
appears.
8Follow the on-screen
instructions to make the network
settings using B/V/v/b and .
If the system cannot connect to the
network, see “Network connection”
(page75) or “Wireless LAN
connection” (page75).
B/V/v/b