72US
BDV-N9100W/BDV-N8100W/BDV-N7100W
4-456-334-12(1)
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF
01)\4456334121_US (U)\100ADD.fm
masterpage: Left
The Super Audio CD sound of an
equipment that is connected to the
HDMI (IN 1) or HDMI (IN 2) jack is not
output.
tHDMI (IN 1) and HDMI (IN 2) does
not accept an audio format that
contains copy protection. Connect the
analog audio output of the equipment
to the AUDIO (AUDIO IN L/R) jacks
of the main unit.
There is no sound from the TV via the
HDMI (OUT) jack when using the
Audio Return Channel function.
tSet [Control for HDMI] in [HDMI
Settings] of [System Settings] to [On]
(page64). Also, set [Audio Return
Channel] in [HDMI Settings] of
[System Settings] to [Auto] (page 64).
tMake sure that your TV is compatible
with the Audio Return Channel
function.
tMake sure that an HDMI cable is
connected to a jack on your TV that is
compatible with the Audio Return
Channel function.
The system does not output sound of
TV programs correctly when
connected to a set-top box.
tSet [Audio Return Channel] in [HDMI
Settings] of [System Settings] to [Off]
(page 64).
tCheck the connections (page 25).
Severe hum or noise is heard.
tMove your audio equipment away
from the TV.
tClean the disc.
The sound loses stereo effect when
you play a CD.
tSelect stereo sound by pressing
AUDIO (page 46).
The sound outputs from the center
speaker only.
tDepending on the disc, the sound may
output from the center speaker only.
No sound or only a very low-level
sound is heard from the surround
speakers.
tCheck the speaker connections and
settings (pages 22, 51).
tCheck the sound mode setting
(page 33).
tDepending on the source, the effect of
the surround speakers may be less
noticeable.
tSet [Sound Mode] to [Auto] (page33).
Distortion occurs in the sound of a
connected equipment.
tReduce the input level for the
connected equipment by setting
[Attenuate - AUDIO] (page 62).
A sudden loud music is heard.
tThe build-in sound demonstration is
activated. Press VOL – to reduce the
volume or press x to stop the
demonstration.
Wireless transmission is not
activated or there is no sound from
the surround speakers.
tCheck the status of the LINK/
STANDBY indicator on the surround
amplifier.
Wireless sound