When the option slot is located on the left side of a Display unit*

*The location of the option slot differs depending on the model of the Display unit. If your Display unit has more than one option slot, install the device in a COM port, a slot used for the network. Refer to the Operating Instructions for the FWD series as well.

2 Check the direction (top/bottom) of this device and insert it into the flat panel display. Make sure that the connector inside the Display is firmly connected.

Using a slot screwdriver, tighten the two screws of this device. Connect the LAN cable, as needed.

INPUT 2

RGB / COMPONENT

 

AUDIO

OUT

L

AUDIO

R

2

NETWORK

2

Caution

Do not touch the connector inside the Display. Doing so may result in injury to yourself or cause this device to malfunction.

Preparations for Using the Networking Function 7GB