Fog-proof filter
Depending on the temperature and humidity, the protecting filter may mists, especially if you breathe near it. You can replace the protecting filter with an optional fog-proof filter (Part No. 1-547-341-12) to prevent the fogging.
Attaching the fog-proof filter
Remove the protecting filter together with the packing ring, and in their place attach the fog-proof filter.
Note
When cleaning the fog-proof filter, wipe the filter very gently with a soft cloth to avoid impairing the anti-fogging effect.
Detach the protective filter from the packing ring.
4
Detach the eyepiece unit from the viewfinder.
1

Cleaning the viewfinder

To ensure a clear view while shooting, you must keep the interior of the viewfinder clean. To clean the viewfinder, remove the viewfinder from the camera and take care not to scratch any of the components within the viewfinder.

For details on detaching the viewfinder, see “Detaching the viewfinder” on page 14.

To remove dust from the viewfinder screen or surface of the mirror inside the barrel

Use a dust blower.

To clean the lens or protective filter

Use a commercially available lens cleaner.

Note

Never use organic solvents such as thinner.

Disassembling the eyepiece

Attaching the Camera Adaptor or Wireless Camera Transmitter

If you attach the CA-570/570P/950/950P Camera Adaptor to the camera, a portable VTR, camera control unit or AC adaptor can be connected to the camera.

By attaching the WLL-CA55 Wireless Camera Transmitter, video and audio signals can be transmitted to a distance.

Attaching the camera adaptor or transmitter

1 Attach the camera adaptor or transmitter to the back of the camera.

Hook the upper part then push the lower part securely in place. Then make sure the adaptor or transmitter is firmly attached to the camera.

1 3 4 2

Eyecup

Eyecup

Protective

Packing

holder

filter

ring

2 Tighten the CA lock screw to secure the adaptor or

2 Remove the eyecup from the eyecup holder.transmitter.

3 Remove the protective filter, together with the packing ring from inside the eyecup holder.

CA lock screw

Removing the camera adaptor or transmitter

Turn the CA lock screw counterclockwise until it idles and then remove the adaptor or transmitter while holding the screw pushed in.

Setting Up the Camera 15