Uniden GH 200, GH 230, GH 130 Engine, Removal, Installation, Relieve pressure, page, 311797B

Engine

Engine

(Figure 4)

Removal

NOTE: All service to the engine must be performed by an authorized HONDA dealer.

1.Relieve pressure, page 7.

2.Remove Fan Belt, page 10.

3.Loosen motor nut (205). Swing motor retainer bracket (204) out.

4.Remove engine (119) and rocker plate (99) from sprayer.

5.Remove four screws (23), washers (7) and nuts (24) and remove rocker plate (99), dampeners (153) and washers (154) from engine (119).

TIA

 

Installation

1.Install rocker plate (99), dampeners (153) and washers

(154)on engine (119) with four screws (23), washers (7) and nuts (24); torque to 125 in-lb (14.1 N·m).

2.Install engine and rocker plate (99) on sprayer.

3.Swing motor retainer bracket (204) in. Tighten motor nut (205).

4.Install Fan Belt, page 10.

















FIG. 4

311797B 13