Mounting the Camera to a Tripod
Mount the camera to a tripod using a
Caution
•Select an appropriate hole from among those at the bottom of the tripod adaptor considering the balance of the weight of the camera and the tripod adaptor. If an inappropriate hole is selected, the camera may fall over.
•Check that the size of the selected hole matches that of the screw of the tripod. If they do not match, the tripod adaptor cannot be attached to the tripod securely.
Mounting procedure
1 Attach the tripod adaptor to the tripod and secure it with the screw.
Tripod adaptor
Tripod
2 Place the camera on the tripod adaptor, and slide forward it along the groove of the tripod adaptor until it clicks.
Tripod adaptor 
Removing the camera from the tripod adaptor
Hold down the red button and pull the lever in the direction of the arrow.
Lever
Red button
If the pin of the tripod adaptor does not return to its original position
After removing the camera, if the pin of the tripod adaptor does not return to its original position, hold down the red button and move the lever in the direction of the arrow to return the pin to its original position. It is not possible to mount a camera with the pin not seated.
Original position
Pin
Setting Up the Camera 17