61

BPL5M hot-swap cage components

The BPL5M hot-swap cage content box includes the following components:

One hot-swap cage (with backplane board attached)

Five hard drive trays

One mainboard connector cable

Two hard drive fault LED connector cables

Installing the BPL5M hot-swap cage

1Remove the housing panels. Refer to page 51 for more detailed instructions.

2Insert the BPL5M hot-swap cage into the housing and secure it with the two screws provided. The hot-swap cage will occupy three 5.25-inch drive bays.

3Attach the power cable, the HDD fault LED cable, and the mainboard connector cable to the backplane board and attach the other end of the connector cable to the mainboard.

Page 71
Image 71
Acer Altos G610 manual BPL5M hot-swap cage components, Installing the BPL5M hot-swap cage