Acer Altos G610 manual Installing the SCO OpenServer Agent

130 Appendix A: ASM Pro quick installation guide

7The Password option is highlighted. Set up a password, and exit the utility.

Note: A password is required when using the ASM Pro Console to remotely change or set any values for the agent, such as threshold values and any trap handling method. If the password is disabled, there is no security protection for the agent when the Console tries to change or set these values.

8 Reboot the system to activate the ASM Pro drivers.

Note: ASM Pro Server Agent automatically starts after the server is restarted and running.

Installing the SCO OpenServer Agent

Note: Make sure the SNMP (Simple Network Management

Protocol) is configured properly.

ASM Pro Server Agent requires SNMP running with community set to 'public' . The IP address of ASM Pro Console should be in /etc/ snmpd.trap so that ASM Pro Console can communicate with ASM Pro Server Agent.

Follow these steps to install the SCO Server Agent:

1Insert the Management CD into your system’s CD-ROM drive.

2Login SCO OpenServer as a super user.

3In shell prompt, type the following to mount CD-ROM:

mount /dev/cd0 /mnt/cd.

4 In shell prompt, type:

ln -s /mnt/cd/APP/ASM/SCOOPE~1/ASMIPMI.DD /tmp/OL.000.000.

5 In shell prompt, type:

custom.

6Follows custom command UI, select Software -> Install New -> From ... -> Media Images -> /tmp.