
31
System rack installation
Observe the electrostatic discharge (ESD) precautions indicated on page 49 when perfoming the following procedures.
Do not attempt the procedures described in the following sections unless you are a qualified technician.
Vertical mounting hole pattern
The four vertical rails of a rack contain mounting holes arranged in a manner shown in the figure below:
The system occupies 6U in the rack. Count the U positions and hole numbers from the bottom up.
Note: The unit of measurement used in this document is "U"
(1U = 1.75 inches or 44.45 mm). The total sum of the heights of all components in the rack measured in "U" cannot exceed the height of the rack. For more information, refer to the documentation that came with your system rack.