Acer Altos G610 manual Removing the BPL5M hot-swap cage, System board connector cable

62 3 Upgrading your system

Note: Refer to “Mainboard layout” on page 54 for the location of the SCSI connector.

4 Replace the housing panels.

System board connector cable

No. Item

1Connects to the mainboard

2Blue strip with red edging

3Connects to the hot-swap cage

Removing the BPL5M hot-swap cage

1Remove the housing panels. Refer to page 51 for more detailed instructions.

2Remove the two screws that secure the hot-swap cage to the housing.