94 |
| 4 BIOS Setup utility |
|
|
|
Parameter | Description | Option |
|
|
|
IRQ | Sets the IRQ channel of serial port 2 | 3 |
|
| 10 |
|
|
|
Parallel Port | Enables or disables the parallel port | Enabled |
|
| Disabled |
|
|
|
Base Address | Sets a logical base address for the | 378h |
| parallel port. This parameter is | 278h |
| configurable only if the Parallel Port |
|
| parameter is enabled. |
|
|
|
|
IRQ | Assigns an interrupt for the parallel | 7 |
| port. This parameter is configurable | 5 |
| only if the Parallel Port parameter is |
|
| enabled. |
|
| If you install an |
|
| a parallel port whose address conflicts |
|
| with the onboard parallel port, a |
|
| warning appears on the screen. |
|
| Check the parallel port address of the |
|
|
| |
| to one that does not conflict. |
|
|
|
|
Operation | Sets your parallel port’s operation | Enhanced |
Mode | mode. This parameter is configurable | Parallel Port |
| only if the Parallel Port parameter is | (EPP) |
| enabled. | |
|
| Extended |
|
| Capabilities Port |
|
| (ECP) |
|
| Standard Parallel |
|
| Port (SPP) |
|
|
|
ECP DMA | Assigns a DMA channel for the ECP |
|
Channel | parallel port function. This |
|
| parameter is configurable only if you |
|
| select the Extended Capabilities Port |
|
| (ECP) as the operation mode. |
|
|
|
|
Floppy Disk | Enables or disables the onboard | Enabled |
Controller | floppy disk controller | Disabled |
|
|
|