100 |
| 4 BIOS Setup utility |
|
|
|
Parameter | Description | Option |
|
|
|
Fast Boot | Allows the system to boot faster by | Auto |
| skipping some POST routines | Disabled |
Silent Boot | Enables or disables the Silent Boot |
| function. When set to Enabled, BIOS is in |
| graphical mode and displays only an |
| identification logo during POST and while |
| booting. After booting the screen displays |
| the operating system prompt (such as DOS) |
| or logo (such as Windows 95). If any error |
| occurs while booting, the system |
| automatically switches to text mode. |
| Even if your setting is Enabled, you may |
| still switch to text mode while booting by |
| pressing the Delete key when you see the |
| "Press DELETE key to enter setup" message |
| on the screen. |
| When set to Disabled, BIOS is in the |
| conventional text mode where you see the |
| system initialization details on the screen. |
Enabled
Disabled
Num Lock | Allows you to activate the Num Lock | Disabled |
After Boot | function upon booting | Enabled |
Memory Test | When set to Enabled, this parameter |
| allows the system to perform a RAM test |
| during the POST routine. When set to |
| Disabled, the system detects only the |
| memory size and bypasses the test routine. |
Disabled
Enabled
Release All | When set to Enabled, this parameter | Disabled |
Blocked | allows the system to bypass testing the | Enabled |
Memory | defective memory banks detected earlier. |
|
Boot from | When set to Enabled, the system boots |
LANDesk (R) | from a LANDesk Service Agent network |
Service Agent | instead of your desktop system. The |
| LANDesk Service Agent is a |
| based code that intervenes in the boot |
| process. Refer to your LANDesk Manual for |
| more information. |
| When set to Disabled, the system boots |
| from the drive specified in the Boot |
| Sequence parameter. |
Disabled
Enabled
