134 | Appendix A: ASM Pro quick installation guide |
10Enter a password and click OK. A password is required when using the ASM Pro Console to remotely change or set any value for the NT Agent. If the password is disabled, there is no security protection for the agent when the ASM Pro Console tries to change or set these values.
11Enter the IP address of the ASM Pro Console system, then click ADD to add trap destinations. Click OK to end the asmcfg utility. This IP address tells the Agent where to report (trap).
12Click Yes to save your changes. The View Readme File dialog box appears.
13Click Yes to view, No to continue.
14Click Finish to exit setup.
Installing the RedHat Linux Server Agent
Follow these steps to install the Red Hat Linux Agent:
1Insert the Management CD into your system’s
2Login Linux server as a super user.
3In shell prompt, type the following to mount
mount /dev/hdX /mnt/cdrom.
4In shell prompt, type the following to change to the new directory:
cd /mnt/cdrom/App/ASM/Linux.
5In shell prompt, type the following to install ASM Pro SNMP agent:
/bin/rpm
6In shell prompt, type the following to configure "SNMP_Config" to receive trap:
/usr/local/share/asm/asmcfg.
7 In shell prompt, type the following to start ASM Pro agent:
8In shell prompt, type the following to stop ASM Pro agent if necessary:
