Controlling an NSP-1 or a Connected Device

The BZNP-D1 software enables you to control an NSP-1 player or a device connected to it by using a control command registered as content in the BZNP-D1 software. The controls include adjusting output audio level of the NSP-1 player, turning the power on/off, and switching the input signal of the plasma display or projector connected to the NSP-1.

See “Registering Additional Control Commands” on page 33 for details on the operations required to register control commands.

Note

You can use control commands stored in the BZNP-D1 software or those already stored on the NSP-1 players. When using a control command stored in the BZNP-D1 software, it is sent to all NSP-1 players in the selected group simultaneously.

1 Check that the BZNP-D1 (PC) option button is selected, and select the target group using the Group drop-down list box.

Or, select the NSP-1 (Remote Control) option button, select the NSP-1, then click [Update].

2 Select the Control tab of the Content Management window.

3 Right-click the control command to be sent, then select [Manual Control] on the popup menu.

If you selected the BZNP-D1 (PC) option button in step 1, the selected command is sent to all NSP-1 players in the selected group.

If the NSP-1 (Remote Control) option button was selected, the control command is carried out on the selected NSP-1.

See “Checking Transfer Status” on page 56 for details on the operations required to check the transfer status and the status of the NSP-1 player.

Deleting Materials and Schedules Stored on an NSP-1

1 In the BZNP-D1 main window, select the NSP-1 (Remote Control) option button, select the NSP-1 player whose data you want to delete using the NSP-1 drop-down list box, then click [Update].

After the Updating Information window is displayed, the contents stored on the selected NSP-1 are displayed in the Content Management window.

2 In the Content Management window, select the tab corresponding to the material or playlist to be deleted. To delete a playlist, for example, select the Playlist tab.

3 Select the items to be deleted.

To select more than one item, hold down the Ctrl key and click the desired items in turn.

To select all the items in a range, hold down the Shift key and click the first and last items in the range.

4 Right-click the selection, then click [Delete] on the popup menu.

Or, press the Delete key.

A confirmation message appears.

5 Click [Yes].

The Deleting Data window appears, then the items stored on the NSP-1 player are deleted.

You can stop the deletion by clicking [Cancel] in the Deleting Data window, but it is not possible to recover data that has already been deleted.

Note

The BZNP-D1 software allows you to delete even the schedules and materials required for playout.

Make sure not to delete items you need for playout.

Operations Routine 4 Chapter

Remote Control of NSP-1 Players 59