Recording from a VCR or TV
– CCD-TR940 only
You can record a tape from another VCR or a TV program from a TV that has video/ audio outputs. Connect the camcorder to the VCR or TV using the supplied A/V cable.
(1)While pressing the small green button on the POWER switch, set it to VTR.
(2)Press r REC and the button on the right together on the camcorder at the
point where you want to start recording.
In recording and recording pause mode, S video and VIDEO/AUDIO jacks automatically work as input jacks.
1
POWER
CAMERA
OFF
2 REC
VTR
|
| TV |
S VIDEO |
| (not supplied) |
|
| VCR |
VIDEO | [a] | S VIDEO |
| [b] | VIDEO |
| AUDIO | |
|
|
AUDIO
: Signal flow
If your VCR or TV has an S video jack, connect using the S video connecting cable (not supplied) [a] to obtain a high quality picture.
If your VCR or TV is a monaural type, connect only the white plug for audio on both the camcorder and the VCR or TV.
If your VCR or TV does not have an S VIDEO OUT jack, connect cable [b]. Do not connect the S video connecting cable (not supplied) [a] to the camcorder.
To check the picture from a VCR or TV before recording
Press P after pressing r. You can check the picture in the viewfinder.
To stop recording
Press p.
Note on recording
You cannot record a picture that has a copyright control signal for copyright protection of software. “COPY INHIBIT” appears if you try to record such a picture.
52
